SWM Contact Us | Home
Accessories  |  Aircraft  |  Boats  |  Cars  |  Helicopters  |  Engines  |  Radio  |  World Models  |  Enya  |  Latest News

Today on SWM
Steve Webb Models
Safe Internet Shopping
at ServoShop.co.uk

About Us


The Shop

Mail Order


Steve Webb
Exclusives & Specials
Click the Buy Link to buy on line
at ServoShop

The Wings Maker
EPO & Balsa Models

Wings Maker FC-1
6 Cell EDF

Ultimate EP
J10 Special
Show Edition

Sky Nova 2
Pre Assembled Combo

See E.P Ogar Kit EPO
Ogar EP BL Combo*
*Wing Bags Included

The World Models
Full Range

Multi Rotor
Quad Shop

Main Dealer
RC Experts in Store

Opti Fuel
Now In Stock
and also

Cool Power
Model Technics
Sidewinder and Much More

Graupner Aerobatics - Model HoTTrigger 1400S Competition


Ready for the next level

The HoTTrigger 1400S COMPETITION is the facelift version of the HoTTrigger 1400S. Like its predecessor, it is an electric aircraft model made of solid-foam. The model was designed and tuned exclusively for aerobatics.

From the EXTRA 330SC and EDGE 540 constructions, the advantages of the design, in terms of flight characteristics, were filtered out and used in the HoTTrigger 1400 S.

With the RC-model HoTTrigger you can have fun, no matter if you are a professional pilot or a beginner in aerobatics. The Motorflieger is the perfect training model for beginners in aerobatics or the intermediate model for every professional.

The Facelift:

  • Revised 800 kV motor with 5 mm shaft, shaft retaining ring, motor mounting bolts additionally countered with stop nuts and more stable propeller driver.
  • All control surfaces are equipped with metal gear servos.
  • New attractive COMPETITION decals sheet, punched out with almost all recesses or partitions.
  • Spare parts, fuselage and wing now without electronics and motor, but provided with the necessary extension cables.

Flight characteristics:

The Graupner HoTTigger 1400S COMPETITION can be excellently moved with ease both in the area of normal aerobatics and in 3D aerobatics. The revised motor provides a bit more power and easier handling in the figures. The revised servos provide higher precision and a higher roll rate on the aileron.

The wings are fastened to the fuselage with the two proven quick-release fasteners and the model is already built on the airfield, which is very pleasant in winter, "as it screwed badly with cold fingers". The generously designed battery compartment makes the model very suitable for everyday use and easy to handle.


The model can be assembled in a short time without much effort and be styled with the enclosed two different decor sets according to your wishes. Assembly time approx. 10 min, glue on the decor 30-45min, depending on the decal sheet. Colour the pilot's bust.

The assembly is limited to the attachment of the chassis, the tail, tail wheel, canopy, pilot bust, receiver installation and propeller / spinner assembly.


You can tune the model with a power pack LiPo 4S2P / 3200mAh No.78130.4, the small additional weight of 42g of the battery does not change the flight behaviour noticeably, but is clearly noticeable in the longer flight time of about 2-3 minutes.


  • Great flight figure
  • Fully aerobatic
  • Very robust and suitable for everyday use
  • Quick assembly without glue
  • Wing with quick release without screws
  • Great, eye-catching fantasy designs
  • Aluminum suspension
  • Light foam pilot bust

Included in the set:

  • 1x fuselage
  • 1x wing halves
  • 1x elevator
  • 1x rudder
  • 1x cabin hood
  • 1x aluminium main landing gear mounted
  • 1x tail wheel
  • Plastic ball joints with brass ball
  • Bolts, stop nuts, finished tapered rudder rods
  • Decal sheet COMPETITION
  • Decals IRON
  • Pilot bust Acro Klaus


  • Overall height [mm]: 370
  • Weight [g]: 1760
  • Tailplane section: NACA 008
  • Overall length [mm]: 1350
  • Material: Graupner SOLIDPOR┬« Rigid
  • Wingspan [mm]: 1400
  • Wing section : NACA 63-A mod

More images


£184.99 Each

Out of stock.
Contact Steve Webb Models
for more details
Privacy statement © SWM Limited 2021 Contact Us