The QR X350 from Walkera is the ultimate Quadcopter.
The model comes fitted with GPS, an electronic compass and altitude sensors and features a GPS hold system. The GPS hold system allows you to fly a position of your choice and then with the flick of a switch the on-board electronics hold the model there. The failsafe and Return To Home functions allow the model to return back to its take-off point on its own either when you choose, or when the radio signal is lost or interrupted. These systems combined with the super stable flight dynamics make for an incredibly easy to use model that is also a joy to fly.
The First Person View (FPV) version includes everything listed above and Walkera's own DV04 camera and 5.8GHz Video Streaming module which transmits straight to the included DEVO F7 7 Channel 2.4GHz radio with integrated colour monitor, and records onto Micro SD card from a slot in the camera, so you have a ready to fly FPV model straight out of the box!
Fixed Position Hover
Using a combination of a GPS receiver capable of reading from up to 12 satellites at once, an electronic compass to keep its heading locked and altitude sensors to maintain height, flick a switch and the QR X350 will sit exactly where you left it.
Return To Home
At the touch of a button, the QR X350 will fly straight along to above the spot it took off from, then gently descend until it touches down at your feet. Perfect for those moments when you've lost orientation or have your hands a little full and need to bring it back safely.
Auto Landing Failsafe
When your battery starts getting low, the QR X350 will automatically begin it's return flight to you. By flying directly across to above the take-off point and then gently descending to land, the QR X350 uses the safest, most efficient route back to you.
Before any flight, the QR X350 automatically locks its throttle system to prevent accidental start-up and possible damage, allowing you to make any fine adjustments to your camera system (if fitted) without having to worry about getting near those blades. Once everything is set and ready, a small flick of the rudder and everything is live. Don't worry if it's not quite right, as re-locking the throttle is just as easy!
Intelligent Orientation Control (IOC)
Using the on-board electronic compass and GPS sensors, the QR X350 has a switchable IOC function. With the IOC function enabled, the model will always fly in the direction you push the controls, which means you don't need to worry about which way the model is facing and can concentrate on bringing it back to base.
GoPro Hero3 / Hero3+ Compatible Camera Mount (Optional Extra)
With the addition of a GoPro Hero3 / Hero3+ compatible camera mount for your QR X350 Quadcopter, you can film your flight and get a true bird's eye of your flying site.
Live Streaming FPV
The FPV version of the QR X350 uses a video camera and 5.8GHz video sender to stream live images directly to the DEVO F7 Video transmitter's integrated video display screen. Ideal for when you're trying to get those aerial photos and footage, as you can see exactly what your camera will be looking at.
- Main Rotor Diameter: 556mm (21.89")
- Main Rotor Blade Length: 206mm (8.11")
- Battery: 11.1v 2200mAh
- Length: 289mm (11.38")
- Width: 289mm (11.38")
- Height: 180mm (4.25")
- Approx. Flight Time: 10 - 15 Minutes
- Number of Channels: 7
DEVO F7 Transmitter
The DEVO F7 uses 2.4GHz DSSS (Direct Sequence Spread Spectrum) technology and features automatic binding for easy start ups. The DEVO F7 is compatible with both helicopters and aircraft, with plenty of adjustment to suit your model's needs. The 3.5" LCD display receives a real-time video feed using 5.8GHz transmissions when paired with the model mounted transmission module and a compatible camera.
- 2.4GHz DSSS Technology
- 5.8GHz Video Receiver
- 7.4v 800mAh Li-Po Battery Pack
- 15 Model Memory
- Adjustable Stick Length and Tension
- 3.5" LCD Display
- Ergonomic Design
- Helicopter and Airplane Compatible
- Wireless Data Transfer Between 2 DEVO F7's
- Simulator Training Port
- Video Output to External Monitor (Additional Lead Required)
- 7 Channel Micro Computer System
- 2.4GHz Frequency
- Output Power: 100mW
- Current Drain: 500mA
- Transmitter Battery: 7.4v 800mAh Li-Po
- Output Pulse Range: 1000-2000ms
- 5.8GHz Video Receiver