Receiver with servo and directional light outputs intended mainly for trains.
The servo outputs can control servos or an external motor controller (ESC) which are not supplied.
Compatible with all DSM2 transmitters. Power with 3.2v - 10v DC (5v recommended).
Rx102 is available in 3 variants. Each has a different set of features.
Each receiver has 8 outputs but 7 are more accessible than the 8th.
The primary purpose and what each output does is described below:
- Purpose (Rx102-1): Loco with joystick Tx, Loco with Tx20/21, Loco with Tx22/24, Loco with Tx23
- Pin1: Ch1 Servo [Throttle]
- Pin2: Ch4 Servo
- Pin3: Ch3 Servo [Direction]
- Pin4: Ch2 Servo
- Pin5: Ch5 Servo
- Pin6: Front Light
- Pin7: Rear Light
- Pin8 (side): Ch6 Servo