CORE RC REF CR161 UAC-50 Universal Digital Charger
Universal Digital Charger, Discharger and Cycler, 12v & 110-240v.
The CORE RC Universal Digital Charger UAC-50 is a multifunction balance and rapid charger/discharger controlled by a high performance microprocessor and specialized operating software.
Multi voltage input of 110-240v AC or 12v DC with compatibility with all types of batteries including Lipo,(1s-6s) Li-lon, NiMH, NiCd,(1-15cells) Pb and LiFE. Fast charging up to 6 amps, discharging, balancing, cycling and much more....you won't need any other charger!!!
- AC Input 110V-240V
- DC Input 11V-18V
- Max Charging Power: 50Watts
- Max Discharging Power: 5Watts
- Charge current range: 0.1-6A
- Discharge current range: 0.1-1A
- NiCd/NiMH Battery Cell Count: 1-15Cell
- LiPo/Li-Fe/Lilon Cell Count: 1-6Cell
- Pb Battery Voltage: 2-20V
- Temperature sensor available
- Balance: 2-6Cells
- Case: Plastic with gunmetal chrome.
- Display: 16*2 character blue backlit display
- Dimension: 135mm X 112mm X 61mm
- Multiple leads included for all applications
- UK 3 Pin plug lead for 240v
Internal Independent Lithium Battery Balancer
The UAC-500 employs an individual cell voltage balancer. It is not necessary to connect an external balancer. (JST XH Balance board and lead included) see also CR114 and CR056 for alternative balance lead type.
Balancing Individual Cells During Discharge
During the process of discharging, the UAC-50 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single cell is abnormal.
Adaptable to Various Types of Lithium Batteries
The UAC-50 is adaptable to various types of Lithium batteries, such as Lipo, Lilon and the new LiFe series of batteries.
Fast and Storage Mode of Lithium Batteries
Purposes to charge Lithium batteries varies, 'fast' charge reduces the duration of charging whereas 'store' state can control the final voltage of the battery. So as to store for a period when the cell is not in use to protect the useful life of the battery.
Delta Peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery voltage exceeds the thresholds the process will be terminated automatically.
Automatic Charge Current Limit
You can set up the upper limit of the charging current when charging NiCad or NiMH battery.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit it can be terminated by the sophisticated microprocessor in the UAC-50.
Processing Time Limit
You can also limit the total processing time to avoid possible defect.
Input Power Monitoring
To protect the 12vDC