SWM Contact Us | Home
Accessories  |  Aircraft  |  Boats  |  Cars  |  Helicopters  |  Engines  |  Radio  |  World Models  |  Enya  |  Latest News

Today on SWM
Steve Webb Models
Safe Internet Shopping
at ServoShop.co.uk

About Us


The Shop

Mail Order


Steve Webb
Exclusives & Specials
Click the Buy Link to buy on line
at ServoShop

The Wings Maker
EPO & Balsa Models

Wings Maker FC-1
6 Cell EDF

Ultimate EP
J10 Special
Show Edition

Sky Nova 2
Pre Assembled Combo

See E.P Ogar Kit EPO
Ogar EP BL Combo*
*Wing Bags Included

The World Models
Full Range

Multi Rotor
Quad Shop

Main Dealer
RC Experts in Store

Opti Fuel
Now In Stock
and also

Cool Power
Model Technics
Sidewinder and Much More

Tactic AnyLink2 2.4GHz Radio Adapter

Unlocks your transmitter's full potential!

Your transmitter alone can only do so much. But your transmitter with the AnyLink2 2.4GHz Radio Adapter can work wonders.

Adding it enables your transmitter to broadcast a true, 2.4GHz signal and operate with the utter dependability of the best in 2.4GHz technology.

The AnyLink2 adapter is compatible with an incredibly wide range of transmitters, as well as incredibly simple and easy to install.

And once it is installed, your transmitter can fly:

  • All Tx-R (Transmitter-Ready) aircraft, and
  • Any aircraft with a 2.4GHz SLT receiver

That includes huge scale aircraft, park flyers and helis, whether they use glow, gasoline or electric power.

But those aren't the only amazing things about AnyLink2. Here are a few more:

  • AnyLink2 works with virtually any transmitter, regardless of brand, band or modulation. That includes old favourites, like-new transmitters and even non-2.4GHz systems
  • AnyLink2 transforms your transmitter into a frequency-hopping, spread-spectrum system. It uses SLT - the same, dependability-proven protocol used in all Tactic transmitters and receivers.
  • AnyLink2 offers all of the convenience, versatility and benefits listed above for far less than the cost of a new 2.4GHz radio system - and for that matter, for less than the cost of most 2.4GHz receivers, as well.
  • AnyLink2 offers even more than the original AnyLink, including:
    • Compatibility with even more transmitters, including many Airtronics® transmitters.
    • A replaceable, rechargeable 1S LiPo battery and USB charger. The battery fits inside the AnyLink2 and provides 15 hours of flying time per charge. And if you use the included charger, it takes less than an hour to recharge.
    • Three adapter cables. Redesigned to work with even more transmitters - and equipped with headphone-type connectors for easy, plug-in installation and solid, connections.
    • Cleaner, easier installs for JR® and Spektrum® owners. You just plug one end into your radio, the other into the AnyLink2 and you're done!
    • Easy mapping. Just push the MODE button until the LED appears opposite the letter code for your radio!
    • Includes built-in clip that snaps onto metal carrying handles plus hard locking mounting strips for backplate mounting.
  • Specifications: TACJ2005
  • Frequencies: 2.403 - 2.483GHz FHSS
  • Channels: Six
  • Input Power: 3.3-4.20V, < 150mAh (provided by 1S, 3.7V 450mAh LiPo pack)
  • Power Indicator: LED with audible tones
  • Inactivity Alarm: 5 minutes
  • Low-Voltage Alarm: Audible Tones (@3.25V)
  • Output Power: <0.1W
  • Dimensions: 2.68 x 1.46 x 0.85 in (68 x 37 x 25 mm)
  • Weight: 1.62 oz (46 g)
  • Requires: Flight transmitter with DSC or trainer jack

Virtually all popular transmitters are compatible with AnyLink2. Many require only the adapter cables included with the AnyLink2: TACM0010, TACM0011 and TACM0012. Three optional adapter cables are available separately. Please note: Adapter cables for the original AnyLink and the AnyLink2 are not cross-compatible.

More images


£39.99 Each

Privacy statement © SWM Limited 2019 Contact Us