This is a superb model, that is easy to fly and launch. Being a delta it's easy to fly slowly, but equally at home when you open the taps.

A full power dive is great fun, as it goes like the proverbial bat out of hell when you want it to. You will need to switch to 'low rates' on such occasions, as it can be a little twitchy at really high speed.

Can be hand launched or use the included dolly (though you may want to put some bigger wheels on if flying off grass)

The manufacturer recommends using a 30 Amp ESC, however the motor/fan can draw in excess of 37 Amps with a good battery, so we recommend using a 40 to 50 Amp ESC.

• The Wings Maker's electric jet series.
• Hot aerobatics at high speed and relaxing flying at low speed.
• Lightweight and strong EPO foam provides structural strength and rigidity.

• High Value Kit version
• Code No. : GE032
• Wing Span : 33 in / 850 mm
• Wing Area : 299 sq in / 19.3 sq dm
• Flying Weight : 24 oz / 680 g
• Fuselage Length : 26.5 in / 675 mm

• World Models Outrunner Motor 28/31 KM0283110
• World Models Ducted Fan Propulsion Unit PL6800010
• 3-channel "mixing radio" (elevator and aileron) with 2x8-9g micro servos
• 2x200mm servo extension cable (if not using the World Models SV2031 Servo with the long lead) (JR or Futaba)
• At least a 40A (burst 50A) brushless ESC.
• 3 cell 11.1V 2100mAh Li-Po Battery (at least 20C rating - we recommend these)
• Battery Charger

If you need extra servos or spare servos for Wings Maker - then click the link to take you to the Wings Maker Servos

The manufacturer recommends using epoxy glue to put this kit together. However from our own experience we did not find epoxy the best type of glue for EPO and we recommend a cyano glue such as Bob Smiths Super Gold or Gold Cyno or Multiplex Zacki adhesive. Many standard forms of Cyno adhesives can also be used, but we always advise testing unknown glues on scrap foam before committing them to use.